The new MC Series from L&W has been created for dive centers, ships, boats and places with limited space. These are suitable for continuous operation and guarantee low maintenance costs due to long service intervals.
Depending on the motor size they are fully equipped with either direct- or star /delta start systems. A super lightweight aluminum frame enables mobile applications, combined with very high filling capacity. The robust and powerful compressor block also allows being used at fully automatic stationary plants.
Specifications
- Electro motor (Standard: 400V, 3 phase, 50Hz)
- Powder coated lightweight aluminium frame in RAL 9006
- Hour counter
- Start / Stop switch with star/delta start system
- Emergency stop switch
- Phase monitoring (e.g. direction of rotation)
- Manual condensate drain
- By your choice 2x filling hose c/w cross design valve or high pressure outlet incl. 1,500 mm high pressure hose
- Pressure maintaining and non return valve
- All pistons c/w steel piston rings
- Improved lubrication system with adjustable oil pump
- Low pressure oil pump with oil sieve
- Oil- / Water separators after 2nd and 3rd stage
- Safety valves after each stage
- 3 x concentric suction/pressure valves
- Filling pressure to your choice (200 or 300 bar)
- Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)
- Breathing air purification in accordance to EN 12021
Options
- Automatic condensate drain incl. collecting tank
- Automatic stop at final pressure
- Up to 2x additional filling hose c/w cross design filling valve
- Auto start system
- Switch over device 200/300 bar
- 200 and 300 bar parallel filling pressures
- Oil pressure gauge
- Oil pressure monitoring c/w auto shut down
- Intermediate pressure gauges
- Cylinder head temperature monitoring with auto shut down
- Puracon filter monitoring (Auto shut down also available)
- Remote control box
- Additional high pressure outlet
- Wheel set
- Power cable and plug
- Special voltages (230 to 690 V) and frequencies (60 Hz) on request
