The user-friendly LW 160 E1 with electric drive is ideal for mobile applications or occasional filling operations.

It comes wired with power cable, plug and phase selector.

The model differs in E and E 1 (E - 3 Phase version / E1 - 1 Phase version).

Specifications
  • Electro Motor (Standard: 230V / 1 phase / 50Hz)
  • Power cable with plug and phase selector
  • Start/Stop Switch
  • Steel frame c/w carrying handles
  • Manual condensate drain
  • Pressure maintaining and non return valve
  • 1x Filling hose c/w cross design valve and filling pressure gauge
  • Intermediate coolers
  • Oil- / Water separators after 2nd and 3rd stage
  • Safety valves after each stage
  • Filling pressure to your choice (200 or 300 bar)
  • Connections to your choice
    (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)
  • Breathing air purification an accordance to EN 12021
Options
  • Additional filling hose c/w cross design valve
  • Automatic condensate drain
  • Automatic stop at final pressure c/w hour counter
  • Switch over device for 200 or 300 bar
  • Motor protection switch
  • Special voltages (230 to 690 V) and frequencies (60 Hz) on request
  • Conversion set: Petrol-/electro version
 
  • LW 160 E1

    LW 160 E1

Download
Data sheet225.76 KB
Operating Instructions11.15 MB
Technical Data

LW 160 E1

  
Type: Air cooled piston compressor
Capacity [l/min] / [Nm³/h] / [cfm]: 160 / 9.6 / 5.6
Max. Pressure [bar]: 330
RPM [1/min]: 1450
No of cylinders / No of stages: 3 / 3
Prime mover type: E-Motor / 230V / 1 Phase / 50Hz
Drive power [kW]: 4.0
Cooling air req. [m³/h]: 1200
Lubrication type: Splash oil
Oil capacity [l]: 0.8
Operating temperature [°C]: +5°C to +45°C
Filter capacity [m³ at +20°C]: 180 (approx. 19 h)
Dimensions W x D x H [mm]: 780 x 420 x 560
Weight [kg]: 90
Noise level (measured at 1 m) [dB(A)]: 84