The LW 1300 E is designed for large industrial applications and is therefore a favorite compressor for breathing air requirements.
Low speed ensured continuous operation, long service intervals and reduced maintenance costs. The compressor unit comes fully wired with star/delta start system and includes 3x 2.3 litre breathing air filter console for wall mounting.
The 4-stage compressor block is mounted on a painted steel frame and allows a working pressure of max. 420 bar (optional). The drive motor is connected to the compressor by a rubber coupling.
Specifications
- Electro motor (E-Motor / 400V / 3 Phase / 50 Hz)
- Powder coated steel frame (RAL 7004)
- Inclusive a remote control box for wall mounting
- Main-, Start/Stop- and condensate test buttons, as well as emergency stop switch
- Phase monitoring (e.g. direction of rotation)
- Hour counter
- Automatic condensate drain
- Automatic stop at final pressure
- Oil pressure gauge
- Intermediate pressure gauges
- Oil pressure monitoring c/w auto shut down
- High pressure outlet with 2000 mm hose
- Pressure maintaining and non return valve
- All pistons c/w steel piston rings
- Low pressure oil pump and filter
- Oil- / Water separators in stainless steel
- Safety valves after each stage
- 4 x concentric suction/pressure valves
- Inclusive 3 x 2.3 l filter console for wall mounting
- Filling pressure of your choice (200 or 300 bar)
- Breathing air purification an accordance to EN 12021
Options
- Auto start system
- Oil temperature display with auto shut down
- Cylinder head temperature monitoring with auto shut down
- 0.8 l Prefilter (Enlarged the lifetime of the filter by approx. 5 hours)
- Puracon filter monitoring (Auto shut down also available)
- Remote Pro Control - RPC
- Power cable and plug
- Block heating device
- 420 bar Version
- Special voltages (230 to 690 V) and frequencies (60 Hz) on request
