Inert Gas Compressors
We delivers high-pressure compressors and the complementary modules for purification, storage and filling.
High performance complete solutions for reliable compression, purification, storage and recovery of inert gases such as helium and argon. This compressor series provides economic efficiency to the maximum due to loss-free compression by means of returning condensation and leak gases.
Take profit of our many years of experience in planning and construction of special systems for applications such as helium recovery, filling plants and different test plants as well as various other helium applications.
Applications
Type | From | To |
---|---|---|
Inlet pressure | atmospheric | 25 bar (362 psi) |
Delivery capacity | 6 m3/h (3,5 cfm) | 250 m³/h (147 cfm) |
Final pressure | 10 bar (140 psi) | 420 bar (6100 psi) |
We individually calculate compressor and drive power according to your application requirement. In this way, we perform the best possible efficiency and highest economic feasibility for you.
Features
- Drive motor
- Powder coated frames (wet painted on request)
- Sound insulated housing up to 61 dB(A)
- Star-delta start system
- Control panel with start-stop switch, emergency stop and condensate test switch
- Operating hour counter
- Automatic condensate drain
- Automatic shut-down when the final pressure is reached
- Automatic shut-down for different temperatures
- Various display options and monitoring
- Gastight inlet filter housing
- Inlet filters installed in all machines as standard
- Low-pressure oil pump
- Pressure maintaining and non return valve
- High-pressure hoses (various lengths of your choice)
- Interstage cooling pipes
- Cooling pipes in stainless steel
- Water separator after each stage
- Safety valves after each stage
- Pistons c/w steel piston rings
- Hardened cylinders
- Concentric suction/pressure valves
- Fill pressures to your choice
- Mobile compressor control available
- Stationary filter monitoring
- Intake pressure regulations
- Buffer tank up to 25 bar(g) c/w drain valve, pressure gauge and safety valve
- Condensate return in additional tank or buffer tank
- TÜV certification
If you have questions about our products please contact:
Lenhardt & Wagner GmbH
Mr. Ronny Sauer
An der Tuchbleiche 39
68623 Hüttenfeld / Germany
Phone: +49 (0)62 56 / 8 58 80 -12
eMail: service@lw-compressors.com