The new Puracon Stationary PRO CO/CO2 is the professional solution for continuous monitoring of humidity + CO + CO2 and as a option O2 during the filling process of breathing air.

The stationary system is used to monitor all the required values of the breathing air quality in accordance with EN 12021 and provides a new security in the field of breathing air monitoring.

The Puracon Stationary PRO CO/CO2 is connected to the high pressure line after the breathing air filter and can also easily retrofitted at already existing breathing air compressors.

The determined values are clearly shown in the illuminated LCD display and if at least one limit value in the breathing air is exceeded the red alarm LED lights up brightly. As an option the compressor can be switched off automatically by an output signal, this guarantees legal compliant filing of breathing air.

Specifications
  • Switch box for wall mounting
  • Large LCD display unit Ø = 96 mm
  • Power cord (length 1.2 m) with CE plug 230 V AC
  • Digital LCD display in ppm%, mg / m³ and bar
  • Pressure / Temperature compensation
  • Red Alarm LED
  • Green Operation LED
  • Pressure reducer including throttle valve
  • Gas flow regulator
  • Max. pressure: 350 bar (Optional 420 bar)
  • Including humidification line
Options
  • Oxygen Sensor
  • Additional remote display incl. cable
  • 420 bar Version
  • Shut down relay
Download
Data sheet216.04 KB
Monitoring Range

Puracon Stationary PRO CO/CO2

 
Humidity: 5 - 120 mg/m³
CO: 0 - 30 ppm
CO2: 0 - 2000 ppm
O2: 0% - 30%
Pressure: max. 350 bar

 

Technical Data

Puracon Stationary PRO CO/CO2

 
Operating pressure: 350 bar (Optional 420 bar)
Power supply: 100 - 240 V
Connector: Inlet: 8L / Outlet: 8L
Protection rating: IP 54
Operating temperature: +5°C to +45°C
Dimensions: 300 x 400 x 155 mm