Hydrogen Compressors

We delivers high-pressure compressors and the complementary modules for purification, storage and filling.

Stationary high pressure compressors for the compression of hydrogen, natural gas and biogas. Our compressors are characterised by a sturdy construction, low speed, long service intervals and an excellent value for money.

Take profit of our know-how in planning and construction of special systems, e.g. natural gas stations, biogas compressors for industrial large-scale plants, hydrogen systems and energy storage.

Applications
Type From To
Inlet pressure atmospheric 150 bar (2100 psi)
Delivery capacity 6 m3/h (3,5 cfm) 700 m3/h (420 cfm)
Final pressure 10 bar (140 psi) 420 bar (6100 psi)

We individually calculate compressor and drive power according to your application requirement. In this way, we perform the best possible efficiency and highest economic feasibility for you.

Standard equipment
  • Sturdy, warp resistant steel frame with high quality industrial coating
  • Final pressure gauge, electric control system according to requirements and application
  • Automatic stop at final pressure
  • Automatic condensate drain
  • All pistons c/w steel piston rings at all stages
  • Hardened compression cylinders
  • Oil lubrication
  • Oil- / Water separators after each stage
  • Safety valves after each stage
  • Final pressure safety valve
  • Pressure maintaining and non return valve, HP outlet
  • Explosion proofed external components for EX zone 1
Options
  • Primary pressure calibration to adjust the desired inlet pressure
  • Inlet buffer tank 150 l, incl. safety valve, manual condensate drain valve, pressure gauge and electrical cut-off solenoid for inlet gas
  • Primary pressure monitoring - pressure shut off at max./min. inlet pressure
  • Electronic Compressor Control - ECC
  • Auto start for semi / full automatic mode
  • Inter-stage pressure gauge
  • Oil pressure gauge and monitoring c/w auto shut down
  • Puracon filter monitoring
  • Compressor block heating for ambient temperature < +5°C
  • Water cooling with stainless steel heat exchanger
  • Additional oil lubrication circuit allows oil changes during operation
  • Filter extension (larger or second filter housing)

 

If you have questions about our products please contact:

Lenhardt & Wagner GmbH
Mr. David Apfelthaler
An der Tuchbleiche 39
68623 Hüttenfeld / Germany
Phone: +49 (0)62 56 / 8 58 80 -43
Fax: +49 (0)62 56 / 8 58 80 -14
eMail: service@lw-compressors.com